Last Update 02/16/2024
Completion Time 4 days 21 hours 16 minutes
Members 2
Kronos Video
Kronos Video

Use this test video to check the proper functioning of the lights on your Kronos Enclosure

Color Frequency
View all
Zoom - Color frequency setting
Zoom - Color frequency setting
Preview

This document shows where the light frequency setting is located in the Zoom dashboard.

TEEM EventBoard - Color frequency setting
TEEM EventBoard - Color frequency setting
Preview

Scroll down to the bottom of the menu in TEEM's dashboard to enter the frequencies to be use to control the light colors of the enclosures.

Frequency to turn off LED
Frequency to turn off LED
Preview

Turn off LED on VisualTarget

Installation Guides
View all
Power Cycle iPad Within Enclosure
Power Cycle iPad Within Enclosure
Preview

Step by step tutorial to reboot an iPad without having to remove it from its enclosure.

VisualTarget Slim Enclosure iPad Installation
VisualTarget Slim Enclosure iPad Installation
Preview

Step by step instruction on how to install an iPad into a VisualTarget slim enclosure.

VisualTarget Installation Guide
VisualTarget Installation Guide
Preview

Guided instructions on how to install the various VisualTarget mounts as well as the install of the tablets in the enclosures.
***NOTE: VisualTarget Enclosures do not support off-the-shelf RJ-45 connectors that have a rubber strain relief after the connector. The cable must be terminated with a standard RJ-45 plug.

Dimensioned drawings
View all
Mini Side Mount 15Deg Lighted
Mini Side Mount 15Deg Lighted
Preview

Lighted Enclosure for the iPad Mini, with 15 Degree Bracket and Side Mount

Pro surf 0deg slim
Pro surf 0deg slim
Preview

Slim Enclosure for the iPad Pro, with 0 Degree Bracket and Surface Mount.

Mini Surface Mount 0Deg Lighted
Mini Surface Mount 0Deg Lighted
Preview

Lighted Enclosure for the iPad Mini, with 0 Degree Bracket and Surface Mount

Drill Guides
View all
Drill Guide Side Mount - VisualTarget
Drill Guide Side Mount - VisualTarget
Preview

This guide takes the guess work out of drilling mounting holes in the right place. Simply print at full scale and place on the mounting area.

Drill Guide Rear Offset Mount - VisualTarget
Drill Guide Rear Offset Mount - VisualTarget
Preview

This guide takes the guess work out of drilling mounting holes in the right place. Simply print at full scale and place on the mounting area.

Development Guides
View all
Kronos Video
Kronos Video
Preview

Use this test video to check the proper functioning of the lights on your Kronos Enclosure

Instructions - RJ-45 plug install
Instructions - RJ-45 plug install
Preview

KRONOS Enclosures do not support off-the-shelf RJ-45 connectors that have a rubber strain relief after the connector. The cable must be terminated with a standard RJ-45 plug.
The instructions show how a cable with molded strain relief can be upgraded to a standard RJ-45 connector.

Network switch and App setup guide
Network switch and App setup guide
Preview

Although the steps below are specific to Cisco PoE Switches (running IOS) with EventBoard from TEEM installed on the tablets. Similar steps can be taken to setup other switches and mobile App.

Default channel for slides, all public users can access content of this channel.