Instructions - RJ-45 plug install

Public Channel / Installation Guides

KRONOS Enclosures do not support off-the-shelf RJ-45 connectors that have a rubber strain relief after the connector. The cable must be terminated with a standard RJ-45 plug.
The instructions show how a cable with molded strain relief can be upgraded to a standard RJ-45 connector.

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

6. INSTRUCTIONS RJ - 45 PLUG INSTALL Page 6 of 7 9. The connector lock should be pressing on the sleeve (not bare wires) 10. A cable - tester can b e used to validate the cable was terminated properly

3. INSTRUCTIONS RJ - 45 PLUG INSTALL Page 3 of 7 3. Remove the sleeve and untangle the individual wir es 4. A rrange the wi re according to T - 568B . Bending the wires help s keep them st raight

1. INSTRUCTIONS RJ - 45 PLUG INSTALL Page 1 of 7 KRONOS Enclosures do not support off - the - shelf RJ - 45 connectors that have a rubber strain relief after the connector. The cable must be terminated with a standard RJ - 45 plug. The instructions below show how a cable with molded strain relief can be upgraded to a standard RJ - 45 connector.

4. INSTRUCTIONS RJ - 45 PLUG INSTALL Page 4 of 7 5. Cut the wires straight , leaving roughly ½ ” (10 mm) o f exposed wires 6. Slide wires into RJ - 45 plug and confirm the w ire order still match T - 568B

5. INSTRUCTIONS RJ - 45 PLUG INSTALL Page 5 of 7 7. Push wires until they reach the end of the plug. This can be confi rmed by looking through the clear side and end of the Rj - 45 plug 8. Using the 8 - position crimp end of the Ethernet c rimp/ c ut/ s trip t ool , crimp the pl ug

2. INSTRUCTIONS RJ - 45 PLUG INSTALL Page 2 of 7 1. Cut the or iginal plug 2. Using t he strip blad e of a n Ethernet c rimp/ c ut/ s trip t ool remove roughly 1 inch (30 mm) of the protective s leeve

7. INSTRUCTIONS RJ - 45 PLUG INSTALL Page 7 of 7 Reference material Below are Amazon l ink s to purc hase items used in this tu torial Belkin RJ45 Modular Connector Kit for 10BT Patch Cables (50 Pack) T RENDnet 8P/RJ - 45 and 6P/RJ - 12, RJ - 11 Crimp, Cut, and Strip Tool, TC - CT68 Cable Tester, VDV Scout Pro 2 Traces and Tests Coax, Data, Telephone Cable with Rem otes Klein Tools VDV501 - 823 For additional information visit support.magtarget.com MagTarget Tech - Support can be reached at : [email protected] or 888 - M - TARGET (888 - 682 - 7438)

Views

  • 180 Total Views
  • 131 Website Views
  • 49 Embeded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 1

  • 6 magtarget.odoo.com