Electronic Housing Swap Instructions

Public Channel / Installation Guides

These are instructions on how to change the electronic housing (aka electronic box) on the back of an enclosure to a new electronic box.

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

1. Electronic Housing Swap Instructions Step 1: Remove these 3 screws . Unplug the LED cable.

5. Electronic Housing Swap Instructions Step 5: While holding the electronic housing against the back plate, screw in the 3 scre ws.

3. Electronic Housing Swap Instructions Step 3: Plug the LED cable into the electronic housing.

4. Electronic Housing Swap Instructions Step 4: Hold the electronic housing against the enclosure back plate so that they are flush. Align the 3 holes on the housing with the 3 holes on the enclosure.

2. Electronic Housing Swap Instructions Step 2: Get the NEW electronic housing . Hold the housing against the back of the enclosure.

Views

  • 139 Total Views
  • 80 Website Views
  • 59 Embeded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 1

  • 9 magtarget.odoo.com