Last Update 02/16/2024
Completion Time 4 days 21 hours 16 minutes
Members 1
Color Frequency
View all
Zoom - Color frequency setting
Zoom - Color frequency setting
Preview

This document shows where the light frequency setting is located in the Zoom dashboard.

VisualTarget - 100 colors - Frequency Key - 2019-02-08
VisualTarget - 100 colors - Frequency Key - 2019-02-08
Preview

Change the color of the light easily by simply entering the corresponding frequency into the application used to control the tablets (EventBoard, Zoom, EMS Software, etc.)
Updated in February 2019 to integrate dimmer LED brightness,
new LED off frequency, rainbow frequency for trade shows.
Legacy frequency is still supported.
If you received a new enclosure prior to February 2018 contact our technical support team to obtain your corresponding Frequency Key

Installation Guides
View all
Power Cycle iPad Within Enclosure
Power Cycle iPad Within Enclosure
Preview

Step by step tutorial to reboot an iPad without having to remove it from its enclosure.

VisualTarget Installation Guide
VisualTarget Installation Guide
Preview

Guided instructions on how to install the various VisualTarget mounts as well as the install of the tablets in the enclosures.
***NOTE: VisualTarget Enclosures do not support off-the-shelf RJ-45 connectors that have a rubber strain relief after the connector. The cable must be terminated with a standard RJ-45 plug.

Electronic Housing Swap Instructions
Electronic Housing Swap Instructions
Preview

These are instructions on how to change the electronic housing (aka electronic box) on the back of an enclosure to a new electronic box.

Dimensioned drawings
View all
Mini Side Mount 15Deg Lighted
Mini Side Mount 15Deg Lighted
Preview

Lighted Enclosure for the iPad Mini, with 15 Degree Bracket and Side Mount

Pro surf 0deg slim
Pro surf 0deg slim
Preview

Slim Enclosure for the iPad Pro, with 0 Degree Bracket and Surface Mount.

Mini Surface Mount 0Deg Lighted
Mini Surface Mount 0Deg Lighted
Preview

Lighted Enclosure for the iPad Mini, with 0 Degree Bracket and Surface Mount

Drill Guides
View all
Drill Guide Side Mount - VisualTarget
Drill Guide Side Mount - VisualTarget
Preview

This guide takes the guess work out of drilling mounting holes in the right place. Simply print at full scale and place on the mounting area.

Drill Guide Rear Offset Mount - VisualTarget
Drill Guide Rear Offset Mount - VisualTarget
Preview

This guide takes the guess work out of drilling mounting holes in the right place. Simply print at full scale and place on the mounting area.

Development Guides
View all
Instructions - RJ-45 plug install
Instructions - RJ-45 plug install
Preview

KRONOS Enclosures do not support off-the-shelf RJ-45 connectors that have a rubber strain relief after the connector. The cable must be terminated with a standard RJ-45 plug.
The instructions show how a cable with molded strain relief can be upgraded to a standard RJ-45 connector.

Network switch and App setup guide
Network switch and App setup guide
Preview

Although the steps below are specific to Cisco PoE Switches (running IOS) with EventBoard from TEEM installed on the tablets. Similar steps can be taken to setup other switches and mobile App.

Default channel for slides, all public users can access content of this channel.