Last Update 02/16/2024
Completion Time 4 days 21 hours 16 minutes
Members 1
Pro rearoffset 15Deg Lighted
Pro rearoffset 15Deg Lighted

Lighted Enclosure for the iPad Pro, with 15 Degree Bracket and Rear Offset Mount

Color Frequency
View all
TEEM EventBoard - Color frequency setting
TEEM EventBoard - Color frequency setting
Preview

Scroll down to the bottom of the menu in TEEM's dashboard to enter the frequencies to be use to control the light colors of the enclosures.

Frequency to turn off LED
Frequency to turn off LED
Preview

Turn off LED on VisualTarget

Zoom - Color frequency setting
Zoom - Color frequency setting
Preview

This document shows where the light frequency setting is located in the Zoom dashboard.

Installation Guides
View all
VisualTarget Electronics upgrade
VisualTarget Electronics upgrade
Preview

This step by step video highlight how to upgrade the electronics on the VisualTarget (KRONOS) iPad enclosure.

484-0003 - GUIDELINE, CONTROLLING LIGHTS ON VISUALTARGET ENCLOSURES
484-0003 - GUIDELINE, CONTROLLING LIGHTS ON VISUALTARGET ENCLOSURES
Preview

The aim of this guideline is to assist developers in making their App capable of controlling the light properties on the VisualTarget line of tablet enclosures.

VisualTarget Kronos SalesSheet
VisualTarget Kronos SalesSheet
Preview

MagTarget VisualTarget Brochure

Drill Guides
View all
Drill Guide Rear Offset Mount - VisualTarget
Drill Guide Rear Offset Mount - VisualTarget
Preview

This guide takes the guess work out of drilling mounting holes in the right place. Simply print at full scale and place on the mounting area.

Drill Guide Side Mount - VisualTarget
Drill Guide Side Mount - VisualTarget
Preview

This guide takes the guess work out of drilling mounting holes in the right place. Simply print at full scale and place on the mounting area.

Development Guides
View all
Kronos Video
Kronos Video
Preview

Use this test video to check the proper functioning of the lights on your Kronos Enclosure

Instructions - RJ-45 plug install
Instructions - RJ-45 plug install
Preview

KRONOS Enclosures do not support off-the-shelf RJ-45 connectors that have a rubber strain relief after the connector. The cable must be terminated with a standard RJ-45 plug.
The instructions show how a cable with molded strain relief can be upgraded to a standard RJ-45 connector.

Network switch and App setup guide
Network switch and App setup guide
Preview

Although the steps below are specific to Cisco PoE Switches (running IOS) with EventBoard from TEEM installed on the tablets. Similar steps can be taken to setup other switches and mobile App.

Default channel for slides, all public users can access content of this channel.