Last Update 02/16/2024
Completion Time 4 days 21 hours 16 minutes
Members 2
Color Frequency
View all
VisualTarget - 100 colors - Frequency Key - 2019-02-08
VisualTarget - 100 colors - Frequency Key - 2019-02-08
Preview

Change the color of the light easily by simply entering the corresponding frequency into the application used to control the tablets (EventBoard, Zoom, EMS Software, etc.)
Updated in February 2019 to integrate dimmer LED brightness,
new LED off frequency, rainbow frequency for trade shows.
Legacy frequency is still supported.
If you received a new enclosure prior to February 2018 contact our technical support team to obtain your corresponding Frequency Key

Zoom - Color frequency setting
Zoom - Color frequency setting
Preview

This document shows where the light frequency setting is located in the Zoom dashboard.

Frequency to turn off LED
Frequency to turn off LED
Preview

Turn off LED on VisualTarget

Installation Guides
View all
484-0003 - GUIDELINE, CONTROLLING LIGHTS ON VISUALTARGET ENCLOSURES
484-0003 - GUIDELINE, CONTROLLING LIGHTS ON VISUALTARGET ENCLOSURES
Preview

The aim of this guideline is to assist developers in making their App capable of controlling the light properties on the VisualTarget line of tablet enclosures.

VisualTarget Kronos SalesSheet
VisualTarget Kronos SalesSheet
Preview

MagTarget VisualTarget Brochure

Dimensioned drawings
View all
Drill Guides
View all
Drill Guide Rear Offset Mount - VisualTarget
Drill Guide Rear Offset Mount - VisualTarget
Preview

This guide takes the guess work out of drilling mounting holes in the right place. Simply print at full scale and place on the mounting area.

Drill Guide Side Mount - VisualTarget
Drill Guide Side Mount - VisualTarget
Preview

This guide takes the guess work out of drilling mounting holes in the right place. Simply print at full scale and place on the mounting area.

Development Guides
View all
Kronos Video
Kronos Video
Preview

Use this test video to check the proper functioning of the lights on your Kronos Enclosure

Instructions - RJ-45 plug install
Instructions - RJ-45 plug install
Preview

KRONOS Enclosures do not support off-the-shelf RJ-45 connectors that have a rubber strain relief after the connector. The cable must be terminated with a standard RJ-45 plug.
The instructions show how a cable with molded strain relief can be upgraded to a standard RJ-45 connector.

Network switch and App setup guide
Network switch and App setup guide
Preview

Although the steps below are specific to Cisco PoE Switches (running IOS) with EventBoard from TEEM installed on the tablets. Similar steps can be taken to setup other switches and mobile App.

Default channel for slides, all public users can access content of this channel.