MagTarget Library

This document shows where the light frequency setting is located in the Zoom dashboard.

Scroll down to the bottom of the menu in TEEM's dashboard to enter the frequencies to be use to control the light colors of the enclosures.

Turn off LED on VisualTarget

Guided instructions on how to install the various VisualTarget mounts as well as the install of the tablets in the enclosures.
***NOTE: VisualTarget Enclosures do not support off-the-shelf RJ-45 connectors that have a rubber strain relief after the connector. The cable must be terminated with a standard RJ-45 plug.

Step by step instruction on how to install an iPad into a VisualTarget slim enclosure.

Step by step instruction on how to install an iPad into a VisualTarget Lighted Enclosure

This guide takes the guess work out of drilling mounting holes in the right place. Simply print at full scale and place on the mounting area.

This guide takes the guess work out of drilling mounting holes in the right place. Simply print at full scale and place on the mounting area.

These are instructions on how to change the electronic housing (aka electronic box) on the back of an enclosure to a new electronic box.

Lighted Enclosure for the 10.2" iPad, with 15 Degree Bracket and Surface Mount

Use this test video to check the proper functioning of the lights on your Kronos Enclosure

Although the steps below are specific to Cisco PoE Switches (running IOS) with EventBoard from TEEM installed on the tablets. Similar steps can be taken to setup other switches and mobile App.

KRONOS Enclosures do not support off-the-shelf RJ-45 connectors that have a rubber strain relief after the connector. The cable must be terminated with a standard RJ-45 plug.
The instructions show how a cable with molded strain relief can be upgraded to a standard RJ-45 connector.

Step by step tutorial to reboot an iPad without having to remove it from its enclosure.

MagTarget VisualTarget Brochure

This video demonstrate how to check for a live Ethernet connection on an iPad connected to a MagTarget KRONOS enclosure.
For additional support check out:
support.magtarget.com

Lighted Enclosure for the iPad Mini, with 15 Degree Bracket and Side Mount

Lighted Enclosure for the iPad Mini, with 0 Degree Bracket and Surface Mount

Lighted Enclosure for the iPad Mini 4, with 15 Degree Bracket and Rear-Offset Mount

Slim Enclosure for the iPad Mini, with 15 Degree Bracket and Rear-offset Mount.

Slim Enclosure for the iPad Pro, with 0 Degree Bracket and Surface Mount.

Lighted Enclosure for the iPad Pro, with 15 Degree Bracket and Surface Mount

Slim Enclosure for the iPad Pro, with 0 Degree Bracket and Rear-offset Mount.