VisualTarget Installation Guide
Guided instructions on how to install the various VisualTarget mounts as well as the install of the tablets in the enclosures.
***NOTE: VisualTarget Enclosures do not support off-the-shelf RJ-45 connectors that have a rubber strain relief after the connector. The cable must be terminated with a standard RJ-45 plug.
Installation Guides
View all
VisualTarget Installation Guide
Preview
Guided instructions on how to install the various VisualTarget mounts as well as the install of the tablets in the enclosures.
***NOTE: VisualTarget Enclosures do not support off-the-shelf RJ-45 connectors that have a rubber strain relief after the connector. The cable must be terminated with a standard RJ-45 plug.
VisualTarget Slim Enclosure iPad Installation
Preview
Step by step instruction on how to install an iPad into a VisualTarget slim enclosure.
VisualTarget KRONOS Lighted Enclosure iPad Installation
Preview
Step by step instruction on how to install an iPad into a VisualTarget Lighted Enclosure
Drill Guides
View all
Electronic Housing Swap Instructions
Preview
These are instructions on how to change the electronic housing (aka electronic box) on the back of an enclosure to a new electronic box.
10.2" Surf 15Deg 4Lights
Preview
Lighted Enclosure for the 10.2" iPad, with 15 Degree Bracket and Surface Mount
8" iPad Enclosures Technical Drawings
View all
Zoom - Color frequency setting
Preview
This document shows where the light frequency setting is located in the Zoom dashboard.
VisualTarget - 100 colors - Frequency Key - 2019-02-08
Preview
Change the color of the light easily by simply entering the corresponding frequency into the application used to control the tablets (EventBoard, Zoom, EMS Software, etc.)
Updated in February 2019 to integrate dimmer LED brightness,
new LED off frequency, rainbow frequency for trade shows.
Legacy frequency is still supported.
If you received a new enclosure prior to February 2018 contact our technical support team to obtain your corresponding Frequency Key
Drill Guide Side Mount - VisualTarget
Preview
This guide takes the guess work out of drilling mounting holes in the right place. Simply print at full scale and place on the mounting area.
Drill Guide Rear Offset Mount - VisualTarget
Preview
This guide takes the guess work out of drilling mounting holes in the right place. Simply print at full scale and place on the mounting area.
12.9" iPad Pro Technical Drawings
View all
Mini Side Mount 15Deg Lighted
Preview
Lighted Enclosure for the iPad Mini, with 15 Degree Bracket and Side Mount
Mini Surface Mount 0Deg Lighted
Preview
Lighted Enclosure for the iPad Mini, with 0 Degree Bracket and Surface Mount
Mini Side Mount 0Deg Lighted
Preview
Lighted Enclosure for the iPad Mini, with 0 Degree Bracket and Side Mount
Mini Rear-Offset Mount 15Deg Lighted
Preview
Lighted Enclosure for the iPad Mini 4, with 15 Degree Bracket and Rear-Offset Mount
Samsung Tab-A 8" T350 Enclosures Technical Drawings
View all
Pro surf 15deg Lighted
Preview
Lighted Enclosure for the iPad Pro, with 15 Degree Bracket and Surface Mount
VisualTarget Electronics upgrade
Preview
This step by step video highlight how to upgrade the electronics on the VisualTarget (KRONOS) iPad enclosure.
Pro rearoffset 15Deg Lighted
Preview
Lighted Enclosure for the iPad Pro, with 15 Degree Bracket and Rear Offset Mount
Samsung Tab-A 8" T380, T290 Enclosures Technical Drawings
View all
Pro surf 0Deg Lighted
Preview
Lighted Enclosure for the iPad Pro, with 0 Degree Bracket and Surface Mount
Pro rearoffset 0Deg Lighted
Preview
Lighted Enclosure for the iPad Pro, with 0 Degree Bracket and Rear Offset Mount

Default channel for slides, all public users can access content of this channel.