
Support Home
VisualTarget Installation Guide
Guided instructions on how to install the various VisualTarget mounts as well as the install of the tablets in the enclosures.
***NOTE: VisualTarget Enclosures do not support off-the-shelf RJ-45 connectors that have a rubber strain relief after the connector. The cable must be terminated with a standard RJ-45 plug.
***NOTE: VisualTarget Enclosures do not support off-the-shelf RJ-45 connectors that have a rubber strain relief after the connector. The cable must be terminated with a standard RJ-45 plug.
Color Frequency
View all
Zoom - Color frequency setting
Preview
This document shows where the light frequency setting is located in the Zoom dashboard.
01:00
0
0
TEEM EventBoard - Color frequency setting
Preview
Scroll down to the bottom of the menu in TEEM's dashboard to enter the frequencies to be use to control the light colors of the enclosures.
01:00
0
0
VisualTarget - 100 colors - Frequency Key - 2019-02-08
Preview
Change the color of the light easily by simply entering the corresponding frequency into the application used to control the tablets (EventBoard, Zoom, EMS Software, etc.)
Updated in February 2019 to integrate dimmer LED brightness,
new LED off frequency, rainbow frequency for trade shows.
Legacy frequency is still supported.
If you received a new enclosure prior to February 2018 contact our technical support team to obtain your corresponding Frequency Key
Updated in February 2019 to integrate dimmer LED brightness,
new LED off frequency, rainbow frequency for trade shows.
Legacy frequency is still supported.
If you received a new enclosure prior to February 2018 contact our technical support team to obtain your corresponding Frequency Key
01:00
0
0
Installation Guides
View all
VisualTarget Installation Guide
Preview
Guided instructions on how to install the various VisualTarget mounts as well as the install of the tablets in the enclosures.
***NOTE: VisualTarget Enclosures do not support off-the-shelf RJ-45 connectors that have a rubber strain relief after the connector. The cable must be terminated with a standard RJ-45 plug.
***NOTE: VisualTarget Enclosures do not support off-the-shelf RJ-45 connectors that have a rubber strain relief after the connector. The cable must be terminated with a standard RJ-45 plug.
01:00
0
0
VisualTarget Slim Enclosure iPad Installation
Preview
Step by step instruction on how to install an iPad into a VisualTarget slim enclosure.
01:00
0
0
VisualTarget KRONOS Lighted Enclosure iPad Installation
Preview
Step by step instruction on how to install an iPad into a VisualTarget Lighted Enclosure
01:00
0
0
Dimensioned drawings
View allDrill Guides
View all
Drill Guide Side Mount - VisualTarget
Preview
This guide takes the guess work out of drilling mounting holes in the right place. Simply print at full scale and place on the mounting area.
01:00
0
0
Drill Guide Rear Offset Mount - VisualTarget
Preview
This guide takes the guess work out of drilling mounting holes in the right place. Simply print at full scale and place on the mounting area.
01:00
0
0
Samsung Tab-A 8" T380, T290 Enclosures Technical Drawings
View all
Electronic Housing Swap Instructions
Preview
These are instructions on how to change the electronic housing (aka electronic box) on the back of an enclosure to a new electronic box.
01:00
0
0
10.2" Surf 15Deg 4Lights
Preview
Lighted Enclosure for the 10.2" iPad, with 15 Degree Bracket and Surface Mount
01:00
0
0
Development Guides
View all
Kronos Video
Preview
Use this test video to check the proper functioning of the lights on your Kronos Enclosure
01:00
0
0
Network switch and App setup guide
Preview
Although the steps below are specific to Cisco PoE Switches (running IOS) with EventBoard from TEEM installed on the tablets. Similar steps can be taken to setup other switches and mobile App.
01:00
0
0
8" iPad Enclosures Technical Drawings
View all
484-0003 - GUIDELINE, CONTROLLING LIGHTS ON VISUALTARGET ENCLOSURES
Preview
The aim of this guideline is to assist developers in making their App capable of controlling the light properties on the VisualTarget line of tablet enclosures.
01:00
0
0
12.9" iPad Pro Technical Drawings
View all
Mini Side Mount 15Deg Lighted
Preview
Lighted Enclosure for the iPad Mini, with 15 Degree Bracket and Side Mount
01:00
0
0
Mini Surface Mount 0Deg Lighted
Preview
Lighted Enclosure for the iPad Mini, with 0 Degree Bracket and Surface Mount
01:00
0
0
Mini Side Mount 0Deg Lighted
Preview
Lighted Enclosure for the iPad Mini, with 0 Degree Bracket and Side Mount
01:00
0
0
Mini Rear-Offset Mount 15Deg Lighted
Preview
Lighted Enclosure for the iPad Mini 4, with 15 Degree Bracket and Rear-Offset Mount
01:00
0
0
9.7" iPad Techinical Drawings
View all
Mini rearoffset 15deg slim
Preview
Slim Enclosure for the iPad Mini, with 15 Degree Bracket and Rear-offset Mount.
01:00
0
0
Samsung Tab-A 8" T350 Enclosures Technical Drawings
View all
Pro surf 0deg slim
Preview
Slim Enclosure for the iPad Pro, with 0 Degree Bracket and Surface Mount.
01:00
0
0
Pro surf 15deg Lighted
Preview
Lighted Enclosure for the iPad Pro, with 15 Degree Bracket and Surface Mount
01:00
0
0
Pro rearoffset 0deg slim
Preview
Slim Enclosure for the iPad Pro, with 0 Degree Bracket and Rear-offset Mount.
01:00
0
0
Pro rearoffset 15deg slim
Preview
Slim Enclosure for the iPad Pro, with 15 Degree Bracket and Rear-offset Mount.
01:00
0
0
Samsung Tab-A 10" T580/T590 Enclosures Technical Drawings
View allSamsung Tab-A 10" T510 Enclosures Technical Drawings
View all10.2" iPad Enclosures Technical Drawings
View alliPad Removal
View allCrestron
View allDefault channel for slides, all public users can access content of this channel.