Kronos Video
Use this test video to check the proper functioning of the lights on your Kronos Enclosure
Development Guides
View all
Kronos Video
Preview
Use this test video to check the proper functioning of the lights on your Kronos Enclosure
Network switch and App setup guide
Preview
Although the steps below are specific to Cisco PoE Switches (running IOS) with EventBoard from TEEM installed on the tablets. Similar steps can be taken to setup other switches and mobile App.
Instructions - RJ-45 plug install
Preview
KRONOS Enclosures do not support off-the-shelf RJ-45 connectors that have a rubber strain relief after the connector. The cable must be terminated with a standard RJ-45 plug.
The instructions show how a cable with molded strain relief can be upgraded to a standard RJ-45 connector.
Dimensioned drawings
View all
TEEM EventBoard - Color frequency setting
Preview
Scroll down to the bottom of the menu in TEEM's dashboard to enter the frequencies to be use to control the light colors of the enclosures.
8" iPad Enclosures Technical Drawings
View all
Zoom - Color frequency setting
Preview
This document shows where the light frequency setting is located in the Zoom dashboard.
Power Cycle iPad Within Enclosure
Preview
Step by step tutorial to reboot an iPad without having to remove it from its enclosure.
Frequency to turn off LED
Preview
Turn off LED on VisualTarget
VisualTarget Kronos SalesSheet
Preview
MagTarget VisualTarget Brochure
Samsung Tab-A 8" T350 Enclosures Technical Drawings
View all
Pro surf 0deg slim
Preview
Slim Enclosure for the iPad Pro, with 0 Degree Bracket and Surface Mount.
Pro rearoffset 0deg slim
Preview
Slim Enclosure for the iPad Pro, with 0 Degree Bracket and Rear-offset Mount.
Pro rearoffset 15deg slim
Preview
Slim Enclosure for the iPad Pro, with 15 Degree Bracket and Rear-offset Mount.
Pro surf 15deg slim
Preview
Slim Enclosure for the iPad Pro, with 15 Degree Bracket and Surface Mount.

Default channel for slides, all public users can access content of this channel.