Turn off LED on VisualTarget

This document shows where the light frequency setting is located in the Zoom dashboard.

Scroll down to the bottom of the menu in TEEM's dashboard to enter the frequencies to be use to control the light colors of the enclosures.

MagTarget VisualTarget Brochure

This step by step video highlight how to upgrade the electronics on the VisualTarget (KRONOS) iPad enclosure.

Step by step tutorial to reboot an iPad without having to remove it from its enclosure.

This guide takes the guess work out of drilling mounting holes in the right place. Simply print at full scale and place on the mounting area.

This guide takes the guess work out of drilling mounting holes in the right place. Simply print at full scale and place on the mounting area.

Use this test video to check the proper functioning of the lights on your Kronos Enclosure

KRONOS Enclosures do not support off-the-shelf RJ-45 connectors that have a rubber strain relief after the connector. The cable must be terminated with a standard RJ-45 plug.
The instructions show how a cable with molded strain relief can be upgraded to a standard RJ-45 connector.

Although the steps below are specific to Cisco PoE Switches (running IOS) with EventBoard from TEEM installed on the tablets. Similar steps can be taken to setup other switches and mobile App.