MagTarget User Forum

Welcome!

This community is meant to be an organic knowledge base for MagTarget products and services. Register to ask questions, share your install tips and tricks and benefit from this well of knowledge. Build up your Karma (by answering questions, etc.) to gain access to more tools.

Hide Intro Register
0

MS Surface Go 2 in Kiosk mode - recommended settings

Avatar
Jean-Michel Thiers

Prolong battery life by enabling Battery Limit setting

This will limit the battery to only charging partially

 

Enabling battery limit on Surface Go and Surface Go 2

The Surface Battery Limit setting can be configured by booting into Surface UEFI (Power + Vol Up when turning on the device). Choose boot configuration, and then, under Kiosk Mode, move the slider to the right to set Battery Limit to Enabled.

Kiosk Mode Battery Limit in Surface Go.

From <https://docs.microsoft.com/en-us/surface/battery-limit>

 

Enable automatic power on after power loss

Access UEFI as shown above and turn on "Automatic power-n after power loss"

Advanced options Enable alternate boot sequence Enable IPv6 for PXE Network bOotoption, Enable Boot from USB devices Enable Boot Confi uration Lock Automatic power-on after power loss

 

 

Adjust screen brightness

Surface Brightness Control - Surface | Microsoft Docs

Avatar
Discard